Fixed Type Innovating Aerosol Extinguishing Systems Eco-friendly Clean Agent
Brief requirements of Aerosol Extinguishing Systems according to GA499.1-2010
- Spray process and state-fire extinguishing device should be able to spray normally after switching on the start signal
- During discharge, there shall be no open fire or spark at the nozzle, and no residue shall overflow during or after injection
- After the completion of spraying, the shell shall not be deformed, burnt through or ignited on the surface of the shell.
- The total filling mass of aerosol generator in a fire extinguishing device shall not be more than 10kg, and the deviation of filling mass shall not exceed 2% of its nominal mass.
- The operating voltage of the electric initiator shall not be greater than 24 vd.c.
- The raw materials used to produce aerosol generating agents should be non-toxic to organisms and the combustion products do not contain harmful ingredients that damage the atmospheric ozone layer.
Fireless 125 technical parameter:
| Item | Specification |
| Overall dimensions(mm) | 240( diameter)X126(height) |
| Extinguishing device weight(Kg) | 6.8 |
| Agent quantity(Kg) | 3.5 |
| Protected volume(m³) | 125 |
| Working temperature(℃) | -50℃~+95℃ |
| Safety current(mA,DC) | ≤150mA |
| Discharge times) | ≤ 19 |
| Service life(year) | 10 |
FAQ for technical terms
- Do the protected area needed 100% closed?
Answer: no, it doesn’t .
- what is ratio of open area to total area in enclosure?
Answer:Represents the unsealing degree of the enclosed space, and its value is the ratio of the unclosed open area in the enclosed space to the total surface area, expressed as a percentage.
- What is flame extinguishing density?
Answer:The mass of an aerosol agent required to extinguish a fire in unit volume, g/m³.
- What is discharge delay time?
Answer:The time when the fire extinguishing device receives the starting signal and the nozzle begins to spew hot gas sol extinguishing agent.
- What is discharging time?
Answer:The time from the beginning discharging aerosol to discharging stopped.
- What is outlet temperature in discharging?
Answer:During the process of discharge heat aerosol fire extinguishing agent, the outlet temperature is where 5 meters away from nozzle.
- Is there any cooling equipment in the generator?
Answer:Yes, it’s medium or device installed in a fire extinguishing device to effectively reduce the temperature of a hot gas aerosol extinguishing agent before it passes through the nozzle.
Application:
data centers/ UPS/ ESP/ museums/ warehouses/ electric cabinets/ generator rooms panels/ engine rooms/ different transportation vehicles
Product Tags:
|
|
Innovating Aerosol Based Automatic Fire Suppression System Eco Friendly Clean Agent Images
|
